|
The sizes if the
Modulo™> cast stones have been specially designed to make the
application process easy. Therefore, there should only be
limited amount of cutting necessary to achieve a professional
and authentic finish. The cutting of the Modulo™> interior cast
stones is very easily done with a straight-back handsaw.
The cutting of the
stones is only necessary for wall ends. It is recommended to
break full stones for other small areas as described above.
Use the recommended
grout from the table included in this brochure to grout the
stones.
The cast stones should be grouted 24 hours after the initial
application. Prepare the grout as indicated on the grout bucket.
Fill the grout bag provided with the grout and cut the tip of
the back off. Squeeze the grout bag and fill the spaces between
the stones keeping the tip of the bag in contact with the wall
(STEP 3).
As
soon as the grout begins to harden (+- 1 hour) push the grout
into the grooves using the narrow bladed tool provided (STEP
4).
Once this step has
been completed use a tool to rake the grout joints. Thereafter,
brush the grout joints with a soft bristled brush (do not use a
wire brush) in a circular movement (STEP 5). |
